RED-COAT WATER REMOVABLE BLOCKOUT Tools & Accessories Point valve and spray from

Point valve and spray from a distance of 6-8 inches while holding a rag underneath screen

removing all chemicals from screen

Scour with stiff brush to assist stencil removal

Curing Direct Prints: Ultrasoft inks will fully cure when the entire thickness of the ink deposit reaches 300° F (149° C)

As a general purpose adhesive

RED-COAT WATER REMOVABLE BLOCKOUT Tools & Accessories Point valve and spray fromAPPLICATION This product is a medium viscosity, water soluble red blockout designed to fill the open areas of the screen not covered by the emulsion. I When the screen is dry and free of contaminants, pour RED COAT on the print side of the screen. Spread over the open areas of the screen until completely filled. II Touch up all defects, including heavy blobs which tend to dry the outside and pop off or smear during printing. Where very fine meshes are