XL75 Alcolor Intermediate Z roller Ionix Filters It is a good replacement

It is a good replacement for any of the styles of adjuster which have been used over the years including the small slot

45mm spigot and a 44mm rear spigot for the filter

These normally stay put in the pan roller drive journal but could easily fall out if the press is run without the roller in place

This is the standard urethane coated gripper used on impression and transfer cylinders in SM/PM/SX74 and SM/PM/SX52 machines

This is thinner than standard self adhesive sheet which gives the correct printing height for a 0

XL75 Alcolor Intermediate Z roller Ionix Filters It is a good replacementBrand new roller, the shaft of this roller is 821mm total length. Just as all of our Press Parts rollers, this is a premium grade ink roller of matching specification to those originally fitted on the press, and supplied with new bearings fitted. Please also look at our fully interactive roller guide also on this site. 50 credit available on return of old roller. Heidelberg equivalent: L4. 030. 380