GM A-Body 9" Rear Housing Suspension Bracket Kit - Late 1967-'72 Almost 10% larger that stock

Almost 10% larger that stock intermediate piston

00 degrees camber and an additional 2 degrees positive caster for the best possible handling

If you are serious about building the ultimate wet sump system

These aluminum bellhousing fit small block and Cleveland top loader or single rail designs

The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine

GM A-Body 9" Rear Housing Suspension Bracket Kit - Late 1967-'72 Almost 10% larger that stockSpeedmaster bracket kit works for late '67 '72 GM A body cars such as Chevelle, Monte Carlo, Cutlass, Skylark, GTO Lemans with domed style spring pads. Kit includes upper control arm brackets with greasable rod ends installed, coil spring perches for the tops of the tubes, lower control arm mounts, urethane bump stops, and separate shock mounts that are not incorporated into the control arm mount so that they may be in boarded for tire clearance.